Palo Alto ION-9000 SD-WAN Appliance (PAN-CG-ION-9000)

29,999.00999,999.00 (-97%)

Sold By: admin

Out of stock

The ION 9000:
  • Establishes connectivity to the data center network and exchanges routing information.
  • Terminates virtual private networks (VPNs) for all Prisma SD-WAN deployed branch sites.
  • Maintains path symmetry and ensures the best path for an application.
  • Enables application Service Level Agreements (SLAs) and path selection in conjunction with branch ION devices.
Compare
SKU: ION-9000 Categories: , ,
Report Abuse
The ION 9000:
  • Establishes connectivity to the data center network and exchanges routing information.
  • Terminates virtual private networks (VPNs) for all Prisma SD-WAN deployed branch sites.
  • Maintains path symmetry and ensures the best path for an application.
  • Enables application Service Level Agreements (SLAs) and path selection in conjunction with branch ION devices.
The Prisma SD-WAN ION 9000 device specifications are described below:
DEVICE SPECIFICATIONS
DESCRIPTION
Place in Network
Large and remote office data center.
I/O
Controller ports
2 x 10/100/1000 RJ-45
WAN/LAN/Internet ports
  • 8 x 10 gigabit Ethernet SFP+
  • Ports 9 -12 support 10G SFP+ only, Ports 13 -16 support 1G SFP and 10G SFP+
  • 8×10 x 10/100/1000 RJ45
  • Port pairs 1/2, 3/4, 5/6, and 7/8 have programmable inline fail-to-wire capability for use in branch device mode
Throughput
Throughput
  • Branch 4 Gbps
  • Data center up to 15 Gbps
Encrypted throughput is measured with 1400 byte packets.
Power and Mechanical
Type/Watts
1+1 Hot swappable redundant PSUs 450W AC
Power input
AC 100-240V @50-60Hz 6-3A
Fan cooling
4 x Hot Swappable cooling fans, direction of air-flow is from front to rear.
Certifications
Certifications
IEC60950-1, cULus, FCC & CE Class A
Environmental
Operating temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Operating humidity
5% to 90% (non-condensing)
Storage humidity
5% to 95% (non-condensing)
Physical
1RU standard 4-post rack space
Recommended
Weight
18.6lbs (8.45Kg)
Dimensions (D x W x H)
20.07″ X 17.24″ X 1.73″ (510 mm x 438 mm x 44 mm)
Physical network connectivity
A single gigabit ethernet copper port with DHCP, and two or more gigabit or ten gigabit ports for other features.
BGP peers
Layer 2 connectivity to two separate network devices that are currently participating in any dynamic routing protocol (BGP, OSPF, EIGRP) with each other.
Internet connectivity
Used to reach the Prisma controller. This connectivity can be in the form of a private connection via a MPLS network through a corporate data center. It can also be a public internet connection provided via local a broadband connection.
Rack mount the ION 9000 on a standard 19 inch rack with square holes:
  • Attach the rack-mount brackets to the ION 9000
  • Unpack the installation kit and retrieve the rails.
  • Remove the chassis mounting brackets from the rails by extending the bracket out and sliding the bracket release button towards the front to fully withdraw it from the rails.
    The ION 9000 uses the chassis mounting brackets to attach to the slide rails for mounting on the rack.
  • Attach the mounting brackets to both sides of the ION 9000.
  • Retrieve the slide lock ears from the ION 9000 accessory kit.
    The slide lock ears attach to the front of the ION 9000 and lock the device in place in the rack.
  • Attach the slide rail to a standard 19-inch rack
  • Select a 1-RU slot to insert the slide rail to the rack.
  • Align the rail end marked REAR to the rear side of the rack.
  • Insert the screws on the rails in the screw holes of the rack and ensure that the metal clasp secures the rails to the rack post.
    If the screws are attached to the rails, do not detach the screws from the rails before inserting in the racks.
    If the rack has threaded round holes:
  • Use fitting pins in the rack mounting kit and screw them through the rack holes.
  • Screw the fitting pins through the rails.
  • Attach the chassis-mounting brackets to either side of the ION 9000.
  • Slide the ION 9000 into the rack and confirm that the device is installed securely.
  • If the rack has unthreaded round holes:
  • Insert the rail behind the hole plate.
  • Secure the rail onto the mounting plates of the rack using screws from the installation kit.
  • Attach the chassis-mounting brackets to either side of the ION 9000.
  • Slide the ION 9000 into the rack and confirm that the device is installed securely.
  • On the front side of the racks, snap the rails in place by inserting the screws in the rack. Ensure that the spring retention clip is fully engaged, so that the rail is securely attached to the rack.
  • Slide the ION 9000 into the rails
  • Align the mounting brackets on the ION 9000 with the slide rail slot and push the ION 9000 in.
  • Slide the bracket release button on both the brackets and slide the ION 9000 into the rack until it clicks into place.
  • The ION 9000 installation kit contains the following parts and tools to install the device:
    • 2x 19-inch 1RU rack mount sliding rails built-in with quick-attach square hole adapters.
    • 2x Mounting brackets with accompanying screws.
    • 2x 19-inch slide lock ears with accompanying screws.
    • 2x Red Cat.5E crossover/rollover ethernet cable.
    • 1x Grey Cat.5E straight through ethernet cable.
    • 2x Power cord—varies depending on the country or region.
    • 1x Screwdriver.
    • 1x USB to Cat5/RJ-45 serial cable.
    • 2x Slide lock ears.
    • Fitting pins.

      Secure the ION 9000 into the rails using the thumb screws on the slide lock ears.
The ION 9000 installation kit contains the following parts and tools to install the device:
  • 2x 19-inch 1RU rack mount sliding rails built-in with quick-attach square hole adapters.
  • 2x Mounting brackets with accompanying screws.
  • 2x 19-inch slide lock ears with accompanying screws.
  • 2x Red Cat.5E crossover/rollover ethernet cable.
  • 1x Grey Cat.5E straight through ethernet cable.
  • 2x Power cord—varies depending on the country or region.
  • 1x Screwdriver.
  • 1x USB to Cat5/RJ-45 serial cable.
  • 2x Slide lock ears.
  • Fitting pins.
The ION 9000 LEDs indicate the following:
ICONS
DESCRIPTION

Displays power status

Green light—Powered on.
Black light—Powered off.

Displays Controller connectivity status

Blue light—Connected.
No light—Not Connected.

Displays disk status

Orange light (blinking)—Displays disk activity.

HA LED

Off—Not configured.

Solid Green—Active with connected backup.
Green (blinking)—Active without backup.
Solid Red—Standby.
Red (blinking)—Failed.

Additional information

Weight 2 kg
Dimensions 5 × 5 × 5 in

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Vendor Information

  • Address:
  • No ratings found yet!

Product Enquiry

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy

Main Menu

Palo Alto ION-9000 SD-WAN Appliance (PAN-CG-ION-9000)

29,999.00999,999.00 (-97%)